Lubricated and checked chassis. Changed oil and oil filter. Checked air filter and breather filter. Checked all fluid levels and tire pressures. Performed basic safety inspection. Road tested vehicle.
Inspected front brakes pads & rotors as well as rear brake pads and rotors or shoes and drums for brake condition & measurements. Inspected entire system for leaks. Lining remaining is: Front ( MM) Rear ( MM)
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS
CHECK AND ADJUSTED TIRE PRESSURE AS PER DOOR PLACARD.
CHECK FOR BRAKE PULSATION
-Removed front brake rotors, machined, reinstalled front brake rotors. Removed & replaced front brake pads. Cleaned and lubricated brake calipers and slide mechanisms. Road test vehicle.
DRAINED TRANSMISSION FLUID, ADDED NEW FLUID AND RAN VEHICLE TO OPERATING TEMPERATURE. DRAINED TRANSMISSION FLUID AGAIN AND REFILLED FLUID TO FACTORY SPECIFICATIONS. TEST DROVE VEHICLE. VERIFIED FLUID LEVEL.
HAZARDOUS WASTE DISPOSAL (TRANSMISSION FLUID)
DIRK N. gave our service a 5 star review on 10/19/2023
Lubricated and checked chassis. Changed oil and oil filter. Checked air filter and breather filter. Checked all fluid levels and tire pressures. Performed basic safety inspection. Road tested vehicle.
Inspected front brakes pads & rotors as well as rear brake pads and rotors or shoes and drums for brake condition & measurements. Inspected entire system for leaks. Lining remaining is: Front (6MM) Rear (NEW)
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS
Lubricated and checked chassis. Changed oil and oil filter. Checked air filter and breather filter. Checked all fluid levels and tire pressures. Performed basic safety inspection. Road tested vehicle.
Inspected front brakes pads & rotors as well as rear brake pads and rotors or shoes and drums for brake condition & measurements. Inspected entire system for leaks. Lining remaining is: Front (4.5MM) Rear (1MM)
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS
Backing vehicle out of parking spot and into shop, heard audible noise from drivers tire area. Did not perform road test due to noise. Inspected brakes, found front brakes at 6mm, found rear shoes at 2mm. Brakes are not the noise heard. Noise is front tires not being torqued. 3 out of 5 lug nuts on drivers side could be taken off by hand. 1 out of 5 on passenger side could be taken off by hand. Torque all lug nuts, when torquing front lug nuts, lug nuts will not properly torque due to washers customer has as spacers. Washers are spacers are unsafe and do not allow enough threds to be grabbed by lug nuts on wheel stud and are more than likely causing lug nuts to back off making them loose. That is why noise customer was hearing progressively got worse as lug nuts were getting looser and looser. Will not perform full road test due to being unsafe. Advise customer not to drive vehicle far until wheel spacers are installed. Wheel spacers have to be installed due to wrong offset on wheels and wheels would hit calipers. **ADVISED CUSTOMER THAT VEHICLE IS NOT SAFE TO DRIVE WITH WASHERS AS SPACERS. CUSTOMER SAYS HE WILL BE RETURNING VEHICLE AT A LATER DATE TO GET PROPER SPACERS INSTALLED ON VEHICLE** *VERIFIED TORQUE ON WHEELS IS 100LBS BEFORE VEHICLE LEFT.*
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS
Lubricated and checked chassis. Changed oil and oil filter. Checked air filter and breather filter. Checked all fluid levels and tire pressures. Performed basic safety inspection. Road tested vehicle.
Inspected front brakes pads & rotors as well as rear brake pads and rotors or shoes and drums for brake condition & measurements. Inspected entire system for leaks. Lining remaining is: Front (7MM) Rear (2MM shoe)
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS
Hooked up BG Brake fluid machine to brake fluid reservoir. Performed brake fluid exchange using BG DOT 4 brake fluid. Verified condition of brake fluid once service is performed. Verified braking system has no air in system.
HAZARDOUS WASTE
CHRISTOPHER D. gave our service a 5 star review on 10/20/2022
Lubricated and checked chassis. Changed oil and oil filter. Checked air filter and breather filter. Checked all fluid levels and tire pressures. Performed basic safety inspection. Road tested vehicle.
Inspected front brakes pads & rotors as well as rear brake pads and rotors or shoes and drums for brake condition & measurements. Inspected entire system for leaks. Lining remaining is: Front (6.5MM) Rear (3MM)
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS
-Remove rear brake rotors, machine, reinstall. Replace rear brake pad linings. Clean and lubricate brake calipers and slide mechanisms. Road test vehicle.
-Remove front brake rotors, machine, reinstall front brake rotors. Replace front brake pad linings. Check front brake disc rotor condition. Clean and lubricate brake calipers and slide mechanisms. Road test vehicle.
Hooked up BG Brake fluid machine to brake fluid reservoir. Performed brake fluid exchange using BG DOT 4 brake fluid. Verified condition of brake fluid once service is performed. Verified braking system has no air in system.
HAZARDOUS WASTE
ZACK M. gave our service a 5 star review on 9/21/2022
Lubricated and checked chassis. Changed oil and oil filter. Checked air filter and breather filter. Checked all fluid levels and tire pressures. Performed basic safety inspection. Road tested vehicle.
Inspected front brakes pads & rotors as well as rear brake pads and rotors or shoes and drums for brake condition & measurements. Inspected entire system for leaks. Lining remaining is: Front (9MM) Rear (2.5MM)
FULL DIGITAL INSPECTION
FLOOR MAT & SEAT COVER IN CUSTOMER VEHICLE
INSPECT & CLEAN ANY GREASE MARKS AND FINGER PRINTS FROM INSIDE AND OUTSIDE OF CUSTOMERS VEHICLE WHEN DONE WITH REPAIRS